UltraFLEXX Shaft Couplings - Applications

UltraFLEXX shaft couplings offer complete application flexibility

High Speed Shaft Couplings – UltraFLEXX for applications where weight and diameter need to be minimized, high speed UltraFLEXX shaft couplings are ideal.
Disengaging Shaft Couplings – A device that normally carries torque but can easily be switched to allow both sides to spin freely.
Torque Limiting Shaft Couplings – The UltraFLEXX can be designed to stop transmitting torque at a preset limit by using shear pins or a spring-loaded "breaker" system.
Torsionally Soft Shaft Couplings – Coupling Corporation can design shaft couplings with quill shafts to virtually eliminate all torsional vibrations.
Limited End Float Couplings – The UltraFLEXX can be designed so that the axial movement is limited to a small distance.
Flywheel UltraFLEXX Shaft Couplings – One flexible element can be mounted directly to a flywheel, while the other end has a standard hum.
Cooling Tower Shaft Couplings – These UltraFLEXX shaft couplings can be made with a long, tubular spacer. The spacer tube is lightweight and very stiff and can be made of stainless steel or a composite material to suit the application. It is capable of large misalignment with low forces on motor and gear shafts for outstanding reliability and performance.

Disengaging UltraFLEXX size 500 for a turbine-driven main feed water pump



Final inspection of a close-coupled UltraFLEXX size 500 with reversed Anderson Clamp Hubs. The coupling drives the main boiler feed pump for a power plant.