The most adjustable vertical coupling is also the easiest to install
Vertical Clamp Couplings are a major improvement over other standard vertical couplings. Using the patented Anderson Clamp Hub design, it eliminates all keys and "clam shells" while giving the user the ability to easily change the position on the shaft as well as the amount of pump rotor lift.
Because of the keyless connection, there is no need for the vertical key to carry torque or the split horizontal key to hold the weight of the pump rotor. One half of the Clamp Coupling slides on to the driving shaft and clamps into place, and the other half clamps on to the vertical pump shaft. The two halves are positioned such that the gap between the two is equal to the amount of lift needed on the pump rotor. Once each half is tight, the connecting bolts are installed, and as they are tightened, the bottom half of the Clamp Coupling, along with the pump rotor, is lifted the correct amount.
Vertical Clamp Couplings are capable of handling an enormous amount of thrust load which is perfect for vertical pumps which have significant weight along with the thrust created by pumping. For example, on a one inch shaft, Vertical Clamp Couplings carry about 19,000 pounds of thrust load. Another benefit of the Clamp Coupling for vertical shafts is the inherent concentricity of the device. There is no need to adjust the clam shells to fix the balance. The two sides can also be spigoted for applications where balance is critical.
Vertical Clamp Couplings are the best way to reduce maintenance time on vertical pump applications as well as increase overall performance of the system.